Exploring Common Types Of Fire Suppression Systems

Just as the name suggests, a fire suppression system serves the sole purpose of putting out a fire. This is a system that tends to be used in combination with smoke detectors and fire alarms in order to protect both people and buildings. There are three common types of fire suppression systems commonly used including water, inert gasses, and chemical agents. The systems can be manual or automatic. The key to choosing which one is right for you is taking the time to learn more about each one and how they operate.

Water Fire Suppression System

Water is both the most common and most well-known fire suppression system in both homes and places of business. With water, you get your choice between manual and automatic. An automatic water suppression system would be attached to a fire detector. The system would be set up to trigger and release the water as soon as it senses smoke, heat, or a flame. Manual systems, on the other hand, are not connected to a detector and require a person to physically activate them in order for them to go off and suppress the fire.

Inert Gases Fire Suppression System

A fire is nothing without oxygen. This is what makes inert gases such an effective way to suppress fires. An inert gas fire suppression system smothers the fire by cutting off the oxygen supply. The biggest downside to an inert gasses fire suppression system is the lack of oxygen. As the system cuts off the oxygen supply and smothers the fire, the lack of oxygen supply would also be smothering you. This type of fire suppression system is very useful as more of a security measure than anything. It is commonly used in places of business with electronics or a computer room. In the event of a fire, the room would be sealed off and the inert gases would smother the fire to prevent the contents of the room from being damaged. This is an ideal option for protecting the contents of a room or the room itself, but not people.

Chemical Agent Fire Suppression System

You have two choices when it comes to chemical agent fire suppression systems including wet and dry chemicals. Potassium carbonate is the most common type of wet chemical and sodium bicarbonate is the most common type of dry chemical. Potassium carbonate is a substance found very commonly in fire extinguishers. It is one of the more effective and safer ways to put out a fire. Sodium bicarbonate, on the other hand, is a powder that is tossed onto a fire in order to put it out. It is just as safe as potassium carbonate for putting out fires. Sodium bicarbonate is a very popular choice for putting out electrical and grease fires. The powder turns into a foamy soap substance as it smothers the fire.

Most households have a combination of chemical and water fire suppression systems. It is also very common to have a combination of automatic and manual fire suppression systems. There is nothing wrong with having a manual system, but you do have to be present at the time of the fire for it to do you any good. Places of business, on the other hand, tend to have a combination of all three systems depending on what type of business they are in and what they have to protect from fires. For more information, visit sites likehttp://www.nwfireinc.com.


Share