3 Tips To Make Grout Cleaning A Breeze

Whether used in the kitchen or the bathroom, a tile surface can add an attractive flair to any home. Best of all, tile is remarkably easy to keep clean. Unfortunately, the same isn't true of the grout between those tiles. If you have tiled surfaces in your home, and would like to learn more about keeping your grout clean, read on. This article will provide three valuable tips. 

1. Use a vinegar spray.

Traditional wisdom holds that the best way to get grout clean is with a bucket of soapy water and a good stiff brush. It may be true that this is the simplest means. However, unless you're prepared to spend a whole day on the task--and a whole lot of elbow grease--you'll probably be better off reaching for a bottle of vinegar.

Because of its natural acidity, vinegar is a potent cleaning agent. It penetrates into the grout, making it easier to scrub loose stubborn dirt and stains. Simply fill a squirt bottle with half vinegar and half water. Spritz the grout thoroughly, allow the vinegar solution to soak in for a few minutes, then scrub it down. You should find stains lifting away with much less effort.

2. Make a paste for tougher stains.

Even with regular cleaning, you're bound to run up against an extra tough stain now and then. This is most common in the kitchen, where cooking spills can cause significant grout discoloration, especially if not attended to right away. Many people simply accept such stains as par for the course. However, they can be easily eliminated using a paste made from baking soda and hydrogen peroxide.

Hydrogen peroxide is a non-toxic and highly effective substance for cleaning. Here all you'll need to do simply mix a small amount of it with baking soda to create a thick paste. Apply this paste to your stain and allow it to soak in before scrubbing the area and wiping it clean. (Don't worry if you notice the paste bubbling; this is a natural result produced by the baking soda.)

3. Seal that grout.

Grout is naturally a porous substance. This means that it will easily absorb moisture--whether the steamy air in your bathroom or the drips and spills in your kitchen. The best way keep this from happening is by applying a grout sealer to your tiled surfaces. Just be sure to only undertake this task after you have cleaned your grout. Otherwise you might end up locking those stains in place for good.

For professional help cleaning your grout, talk with a service like All American Stone & Tile Care Inc.


Share